Posts Tagged ‘Replacement’

Watts 5-PK-4SV Premier 1-Year 4-Stage Reverse Osmosis Replacement Filter Kit, 5-Pack

From the Manufacturer

4 stage reverse osmosis replacement filter kit. This kit contains one year worth of replacement filters for your four stage reverse osmosis system. This kit contains two (2) Sediment, two (2) Carbon Block, and (1) 6″ GAC Inline Polishing Filter. Replacement filters are standard 10 inch replacement filters, so they will fit the Watts Premier reverse osmosis systems as well as other standard 10 inch filter housings. Refer to your system installation and operation manual for proper filter change out procedures. To ensure ease of installation and maintenance we have here on staff a full customer service and technical support team you can call for assistance.

(more…)

GE SmartWater Replacement Reverse Osmosis Membrane (FX12M)

The GE SmartWater replacement reverse osmosis membrane (FX12M) fits the following GE 12 gallon per day reverse osmosis drinking water systems: GE PNRV12Z, GE PNRV12ZBL, GE PNRV12, and GE GXRV10. When installed in a GE GXRV10 or PNRV12, this GE reverse osmosis membrane removes: 99% of Lead, 99.95% of Cysts, 97% of Mercury, 99% of Chemicals/VOCs, 99% of Copper, 97% of Tannins, and Particulates 0.5-1.0 micron. It also reduces Sediment, Rust, Chlorine (Taste and Odor), Nitrate/Nitrite, Sodium, Magnesium, Ammonia, and Arsenic. GE recommends that you replace the membrane when your system monitor lights indicate replacement is required (approximately 3-5 years).

(more…)

GE SmartWater Replacement Reverse Osmosis Filters (FX12P)

The GE SmartWater replacement reverse osmosis filter set (FX12P) fits the following GE 12 gallon per day reverse osmosis drinking water systems: GE PNRV12Z, GE PNRV12ZBL, GE PNRV12, and GE GXRV10. When installed in a GE GXRV10 or PNRV12, this GE reverse osmosis replacement filter set removes: 99% of Lead, 99.95% of Cysts, 97% of Mercury, 99% of Chemicals/VOCs, 99% of Copper, 97% of Tannins, and Particulates 0.5-1.0 micron. It also reduces Sediment, Rust, Chlorine (Taste and Odor), Nitrate/Nitrite, Sodium, Magnesium, Ammonia, and Arsenic. GE recommends that you replace the filter every 6 months OR after 900 Gallons of water have been filtered OR if your system monitor lights indicate replacement is required OR if you notice a decrease in the flow of water or objectionable tastes in the water.

(more…)